|
|
|
|
 |
| The rugged and reliable RQR 2A reversible, limited rotation motor offers fixed limits up to 320 degrees travel. As well as speeds from 60 MPR through to 32 RPM. The built in heat-treated all metal gearbox delivers a torque range up to 10.18Nm (90 lbs. in). Widely used in worldwide applications as Damper Control, Gas and Air Valves, Industrial Ovens and Boilers. |
| Zella |
| RQR |
| £362.52 Incl VAT (EU) |
|
|
The rugged and reliable RQR Motor Mode 1 is a continuous rotation motor with built in heat-treated gearbox. It is designed to run 24/7 if required and will deliver a torque of up to 10.18 NM (90 lbs. In) depending on speed with a speed range of 60 MPR to 32 RPM
ie 1.05RPM = 10.18NM
2RPM = 5.09NM
The High Torque versions can boost the lower torque faster speed motors, but not to more than the maximum 10.18NM |
| Zella |
| RQR |
| £322.97 to £382.97 Incl VAT (EU) |
|
|
| The rugged and reliable RQR Motor Mode 1 is a continuous rotation motor with built in heat-treated all metal gearbox. It is designed to run 24/7 if required and will deliver a torque of up to 10.18 NM (90 lbs. In) with a speed range of 60 MPR to 32 RPM |
| Zella |
| RQR |
| £322.97 Incl VAT (EU) |
|
|
| The rugged and reliable RQR Motor Mode 1 is a continuous rotation motor with built in heat-treated all metal gearbox. It is designed to run 24/7 if required and will deliver a torque of up to 10.18 NM (90 lbs. In) with a speed range of 60 MPR to 32 RPM |
| Zella |
| RQR |
| £304.69 Incl VAT (EU) |
|
|
Programmable Count Controller - Divider Unit
Progammable count controller for use in applications which utilise pulse or electronic sensor techniques. Typical applications include; batch control, flow meter control and pre scaling, preset conveyor routing, automatic machine lubrication control, metering pump control, PLC input prescaling and pulse control sequencing.
Provides an output pulse after a preset number of input pulses
Input/Output divide ratio 1 to 4095
Output pulse adjustable between 0.1 and 5 seconds
Maximum input pulse rate 100Hz ( can be set to 5Khz)
Built in 12 and 24 volt power supplies to provide power to sensors, displays etc
NPN output for driving LCD counters etc
DIN rail or surface mounting
|
| PD |
| £100.26 Incl VAT (EU) |
| Monday to Thursday 8.30 - 17.00, Friday 8.30 - 15.00 |
|
|
|
| | | | |
