|
|
|
|
|
| |
The EP-8000 Series Electro-Pneumatic Transducers convert a voltage or current signal from an electronic controller into a pneumatic output pressure signal. An increase or decrease in the input signal proportionally increases or decreases (respectively) the output pressure signal from the EP-8000.
Features and Benefits
Compact simple design, makes the EP-8000-4 ideal for installation on a variety of mounting surfaces, including direct mounting on pneumatic valve actuators
Choice of 0-10Vdc or 4-20mA input range means it can interface with a wide range of controllers,making the unit ideal for retrofit installations.
Hypodermic needle test point.
Factory set fully adjustable zero and span allowing field callibration, saving on instalation costs.
Action: Proportional, direct acting.
Supply Pressure: 18-25 Psig nominal 20 psig Air supply must be clean, dry, and oil free.
Linearity: 5% max of output span between 3 to 15 psig
Ambient operating temp: 41 to 122 Deg. F (5 to 50 Deg. C)
|
|
 |
£182.78 Incl VAT (EU)
|
|
|
|
|
|
|
