Electro-Pneumatic Transducer - (I/P) Converter EP-8000-4

Electro-Pneumatic Transducer - (I/P) Converter EP-8000-4

Johnson Controls EP-8000 series I/P Converter.

Zella Electro-Pneumatic Transducer - (I/P) Converter EP-8000-4

More Images

Electro-Pneumatic Transducer - (I/P) Converter EP-8000-4 Price From £258.03 ex VAT

Product Information

Model: EP-8000-4


The EP-8000 Series Electro-Pneumatic Transducers convert a voltage or current signal from an electronic controller into a pneumatic output pressure signal. An increase or decrease in the input signal proportionally increases or decreases (respectively) the pressure. The EP-8000 is designed to output a proportional
pneumatic control signal in response to an electronic control signal. Barbed air connections for 5/32 or 1/4 inch O.D. polytubing. 

Features and Benefits

Features                                                                                                                                     Benefits
Compact, Simple Design                                                                             Eases installation on a variety of mounting surfaces, including direct mounting on pneumatic valve actuators
Choice of 0-10 VDC or4-20 mA Input Range                                 interfaces with a wide range of controllers, making the unit ideal for  retrofit installations
Hypodermic Needle Test Point                                                              Allows for fast and easy output pressure signal measurement                                                             

Factory Set, Fully Adjustable Zero and Span                                  Facilitates field calibration, saving installation costs
High Accuracy with Low Hysteresis                                                   Provides many years of use with less time spent on maintenance

Regardless of the mounting method chosen, the
EP-8000 must be mounted within 5° of vertical for
proper operation. (Refer to Figures 6 and 7.) In most
cases, the vertical position of the EP-8000 can be
obtained by correctly positioning the transducer's
mounting bracket and/or angle bracket. Do not mount
an EP-8000 directly to a damper actuator.                     

/images/EP-8000-4 IPTransducer Dimensions.jpg                             

Payment - Safe and Secure

Sage Pay Logo

Share This Product